Meade-instruments LX200GPS User Manual download pdf (Page 44)

MAINTENANCE

LX200GPS telescopes are precision optical instruments designed to yield a lifetime of

rewarding applications. Given the care and respect due any precision instrument, your

LX200GPS will rarely, if ever, require factory servicing. Maintenance guidelines include:

a. Avoid cleaning the telescope’s optics: A little dust on the front surface of the tele-

scope’s correcting lens causes virtually no degradation of image quality and

should not be considered reason to clean the lens.

b. When absolutely necessary, dust on the front lens should be removed with gen-

tle strokes of a camel hair brush or blown off with an ear syringe (available at any

pharmacy). DO NOT use a commercial photographic lens cleaner.

c. Organic materials (e.g., fingerprints) on the front lens may be removed with a

solution of 3 parts distilled water to 1 part isopropyl alcohol. You may also add 1

drop of biodegradable dishwashing soap per pint of solution. Use soft, white facial

tissues and make short, gentle strokes. Change tissues often.

Caution: Do not use scented or lotioned tissues or damage could result

to the optics.

d. Do not, for any reason, remove the correcting plate from its machined housing for

cleaning or other purposes. You will almost certainly not be able to replace the

corrector in its proper rotational orientation and serious degradation of optical per-

formance will result. Meade Instruments assumes no liability for damage incurred

to the telescope in this way.

e. If the

LX200GPS is used outdoors on a humid night, water condensation on the

telescope surfaces will probably result. While such condensation does not nor-

mally cause any damage to the telescope, it is recommended that the entire tel-

escope be wiped down with a dry cloth before the telescope is packed away. Do

not, however, wipe any of the optical surfaces. Rather, simply allow the telescope

to sit for some time in the warm indoor air, so that the wet optical surfaces can

dry unattended.

f. If your

LX200GPS is not to be used for an extended period, perhaps for one month

or more, it is advisable to remove the batteries from the telescope. Batteries left

in the telescope for prolonged periods may leak, causing damage to the tele-

scope’s electronic circuitry.

g. Do not leave your

LX200GPS inside a sealed car on a warm summer day; exces-

sive ambient temperatures can damage the telescope’s internal lubrication and

electronic circuitry.

h. The microfocuser is carefully adjusted at the factory. If it becomes necessary to

adjust the microfocuser ball bearings (see Fig. 30), it must be performed by fac-

tory trained technicians. If the microfocuser is improperly adjusted, performance

will degrade and damage will result. Damage due to improper adjustments not

authorized by the factory will not be covered under warranty.

Collimation

The optical collimation (alignment) of any astronomical telescope used for serious

purposes is important, but in the case of the Schmidt-Cassegrain design of the 8", 10",

and 12"

LX200GPS models, such collimation is absolutely essential for good perform-

ance. (Note: The 7" model, a Maksutov-Cassegrain, does not need to be collimated.)

Take special care to read and understand this section well so that your

LX200GPS will

give you the best optical performance.

As part of final optical testing, every Meade Schmidt-Cassegrain is precisely collimat-

ed at the Meade factory before shipment. However, vibrations in shipping can cause

the optical system to become misaligned. Re-aligning the optics is, however, a

straightforward process.

To check the collimation of your

LX200GPS, center a bright star that is overhead, or

use a “hot spot” of reflected Sunlight from a chrome car bumper, with the supplied

26mm eyepiece. Allow the telescope to adjust to the temperature of your observation

site before proceeding; temperature differences between the optics and the outside

air can cause distortion in the images.

Fig. 30: Microfocuser ball bearings.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 71 72

Comments to this Manuals

No comments

Meade-instruments LX200GPS User Manual Page 44

Comments to this Manuals

Related products and manuals for Optical devices Meade-instruments LX200GPS