Meade-instruments DS Gen 1 (60, 70, 80, 90, 114, 127) User Manual

DSP/N 14-0500-00 06/00®

The diagonal mirror permits a comfortable 90° angle for observing sky objects with DS 60mmthrough 90mm refracting telescopes; in addition the diagonal

obtained when an eyepiece is used alone. In the example above a 25mm eyepiece results in28X magnification with the Meade 60mm DS telescope; when this

- 12 -2133212345MNP12123QR21234S

Appendix 1: Optical Alignment of 114mm and 127mm ModelsMeade DS 60mm, 70mm, 80mm, and 90mm refracting telescopes are optically aligned (colli-mated) a

- 14 -21T12U

Appendix 2: Telescope Control SystemsDepending on the Meade DS telescope model, one of the following manual or electronic con-trol systems may be incl

- 16 -12345VMEADESPEEDINFOCUSOUTMODE512346XCOMPUTER CONTROLHBX12vAZ ALT AUXWMEADESPEEDINFOCUSOUTMODE132Y67

- 17 -3. Attach the horizontal motor assembly (V-4) to the telescope by following the same proce-dure outlined in step 2, above. Note: With both the

5. The IN and OUT keys are used in conjunction with the optional Meade #1240 ElectricFocuser. With the #1240 unit attached to the telescope’s focuser

Appendix 3: Optional Electronic and Computer Drive Systems Availablefor Your Meade Digital Electronic Series TelescopeYour Meade DS telescope can be e

ADVANCED PRODUCTS DIVISIONMeade Instruments CorporationWorld’s Leading Manufacturer of Astronomical Telescopes for the Serious Amateur6001 Oak Canyon,

CONTENTSIntroduction ...5Unpackin

- 4 -1234561171982191820101213131314161715A

Introduction: Meade Digital Electronic Telescope Series (DS) models are illustrated in the fol-lowing figures: Fig. A — 60mm and 70mm refracting teles

- 6 -B15278999346134567256712348119101010CD123455E

use a “+” (Phillips-head) screwdriver to tighten the bolt to a “firm feel.” Do not overtighten. Notethat each tripod leg includes a flip-lock (A-13) f

- 8 -123F12 87456333]30mm(1.2")24mm(0.94")148mm(5.8")176mm(6.9")6 x 30mm5 x 24mm132GHJK

screwdriver, secure the bracket in position by tightening the two attachment screws (G-1)inside the bracket (these screws are placed inside the bracke